The Remington 700 is a popular choice for hunting and target shooting. It is a bolt-action rifle that is known for its accuracy. If you are a new owner of a Remington 700, or are thinking about purchasing one, you may be wondering how to adjust the trigger. In this blog post, we will give you a step-by-step guide on how to adjust the trigger on a Remington 700.
Why Adjust the Trigger on Your Rem 700?
There are a few reasons you might want to adjust the trigger on your Remington 700. Maybe you’re having trouble hitting your targets, or maybe you just want a lighter, crisper trigger pull. Either way, adjusting the trigger is a relatively simple process that can make a big difference in your shooting.
What Tools Do You Need to Adjust the Trigger on Your Rem 700?
Assuming you would like a list of the tools you need to adjust the trigger on a Rem 700:
- A small punch or another similar tool
- A small flathead screwdriver
- A small hammer
- A small amount of oil
How to Adjust the Trigger on Your Rem 700?

First, you will need to remove the stock from the rifle. Once the stock is removed, you will need to locate the trigger assembly. The trigger assembly is located in the receiver, just behind the magazine well.
Next, you will need to remove the trigger assembly from the receiver. To do this, you will first need to remove the trigger guard. The trigger guard is held in place by two screws, located at the front and rear of the trigger guard. Once the screws are removed, the trigger guard can be slid off of the receiver.
With the trigger guard removed, you will now have access to the trigger assembly. The trigger assembly is held in place by two screws, located on either side of the assembly. Remove these screws, and the trigger assembly can be pulled out of the receiver.
Now that the trigger assembly is removed from the receiver, you will be able to see the trigger itself, as well as the trigger spring. The trigger spring is what provides the force necessary to release the sear, and is what you will need to adjust in order to adjust the trigger pull.
To adjust the trigger spring, you will first need to compress it. To do this, use the small punch or other similar tool to push on the end of the spring, located at the back of the trigger assembly. Once the spring is compressed, you can use the small flathead screwdriver to turn the adjustment screw, located in front of the spring. Turning the screw clockwise will increase the tension on the spring, and will result in a heavier trigger pull. Turning the screw counterclockwise will decrease the tension on the spring, and will result in a lighter trigger pull.
Once you have the trigger pull set to the desired weight, you can reassemble the trigger assembly and reinstall it in the receiver. Be sure to oil the trigger assembly before reinstalling it, as this will help to ensure smooth operation.
If the Trigger is Still Not Functioning Properly, Further Adjustments May Be Necessary?
If the trigger is still not functioning properly, further adjustments may be necessary. The adjustment screws are located on the outside of the trigger housing. The front adjustment screw adjusts sear engagement and the rear adjustment screw adjusts trigger pull weight.
Frequently Asked Questions
What is the best way to adjust the trigger on my Rem 700?
The best way to adjust the trigger on your Rem 700 is to remove the stock and then access the trigger assembly. Once you have access to the trigger assembly, you will need to adjust the set screw that is located on the front of the trigger.
How do I know if the trigger on my Rem 700 is adjusted correctly?
The best way to know if the trigger on your Rem 700 is adjusted correctly is to test it out. Once you have adjusted the set screw, you will want to test the trigger by dry firing the gun. If the trigger feels good, then it is likely adjusted correctly. However, if the trigger feels too light or too heavy, you will need to readjust the set screw.
What are the consequences of an incorrectly adjusted trigger on my Rem 700?
If the trigger on your Rem 700 is not adjusted correctly, it could result in the gun firing when you do not want it to. This could lead to serious injury or even death. Therefore, it is important that you make sure the trigger is adjusted correctly before using the gun.
Is there anything else I need to know about adjusting the trigger on my Rem 700?
No, there is not anything else you need to know about adjusting the trigger on your Rem 700. However, if you have any further questions, you should consult the owner’s manual or contact a qualified gunsmith.
What is the ideal trigger pull weight for a Rem 700?
There is no definitive answer, but most shooters prefer a trigger pull weight between 2.5 and 3.5 pounds.
How do I know if my trigger is set too light?
If your trigger is set too light, it could result in an accidental discharge if the gun is jarred or dropped.
How do I know if my trigger is set too heavy?
If your trigger is set too heavy, it will be difficult to shoot accurately.
Final Word
If you have a Remington 700, you may want to adjust the trigger. This can be done by following the steps in this article. First, you will need to remove the stock. Next, you will need to remove the trigger guard. After that, you will need to remove the trigger. Finally, you will need to reassemble the trigger.

A. Wilcox Head is a lifelong shooter, hunter, and firearms enthusiast. Head grew up in a family where firearms were a way of life, and from an early age, he was taught the importance of firearm safety, accuracy, and proper hunting techniques.
2 thoughts on “How To Adjust The Trigger On A Rem 700”