Welcome to the guide on how to adjust your Trophy Ridge 5-pin sight! In this tutorial, we will provide you with step-by-step instructions on how to properly adjust your Trophy Ridge sight. We’ll cover everything from mounting the sight to adjusting the pins and sighting in. So let’s get started!
Trophy Ridge 5 Pin Sight: What is It and What Does It Do
The Trophy Ridge 5 Pin Sight is an advanced archery sight that provides archers with improved accuracy and precision. It is designed to be used in conjunction with a bow’s stabilizer and other accessories. The sight consists of five pins, each of which has its own individual yardage setting, allowing the archer to adjust the sight to the desired yardage for any given shot. The pins can be adjusted for windage and elevation, and the sight also has a bubble level that helps the archer keep their bow level when shooting. The 5 Pin Sight also helps the archer to quickly and accurately identify their target, and the sight can be used to adjust the arrows’ trajectory when shooting in windy conditions. This sight is ideal for both beginner and experienced archers alike, as it provides them with the tools they need to improve their accuracy and precision.

Understanding the Basics of Adjusting a Trophy Ridge 5 Pin Sight
Adjusting a Trophy Ridge 5 Pin Sight is an important part of bowhunting. It requires knowledge and skill to ensure the sight is properly set up to ensure accuracy. Here are the basics of adjusting a Trophy Ridge 5 Pin Sight:
- Start by making sure the sight housing is properly secured to the riser of the bow. This can be done by using the two screws located on the bottom of the sight.
- Once the sight is securely mounted, use the sight level to make sure the sight is level with the riser.
- The next step is to adjust the pins. Start by loosening the locking screws found on the outside of the sight housing. This will allow you to move the pins up and down.
- Adjust each pin to the desired height. This is done by using the windage and elevation adjustments located on the side of the sight.
- Once the pins are at the desired height, tighten the locking screws.
- Finally, use a bow square to ensure the pins are aligned correctly.
By following these steps, you can ensure your Trophy Ridge 5 Pin Sight is properly adjusted and ready for use.
Step-by-Step Guide on How to Adjust a Trophy Ridge 5 Pin Sight
- Begin by loosening the elevation and windage adjustment screws located on the side of the sight. To do this, use an Allen wrench to turn the screws counterclockwise until they are loose.
- Once the screws are loosened, use your fingers to position the sight in the desired direction.
- To ensure the sight is properly aligned, use a bubble level or other alignment tool to make sure the sight is level.
- Once the sight is properly aligned, use the Allen wrench to tighten the elevation and windage adjustment screws.
- Finally, use the knobs on the top and bottom of the sight to adjust the distance of the pins. To do this, turn the knobs clockwise to increase the distance and counterclockwise to decrease the distance.
Tips to Help You Get the Most Out of Adjusting Your Trophy Ridge 5 Pin Sight
In order to get the most out of adjusting your Trophy Ridge 5 Pin Sight, it is important to first familiarize yourself with the sight itself. Take a few moments to get to know the sight, its features, and its adjustments. This will help you understand the basics of how it works and how to make the most of its features.
Next, make sure that the sight is properly mounted to your bow. This is especially important when using a 5 pin sight, as the pins will need to be perfectly aligned for accuracy. Make sure that the sight is firmly mounted and that the pins are in the correct positions.
Once the sight is installed, it’s time to adjust it. Start by setting the sight for the environment in which you’ll be shooting. This includes adjusting the yardage to the target and setting the pins for the distances of the shot. This can be done by adjusting the sight’s windage and elevation knobs.
Once the sight is set up, it’s time to adjust the pins. This is done by adjusting the pins to the desired distances. Make sure to adjust each pin individually so that they are all set at the same distance. This will help you achieve better accuracy.
Common Troubleshooting Issues When Adjusting a Trophy Ridge 5 Pin Sight
Common troubleshooting issues when adjusting a Trophy Ridge 5 Pin sight include difficulty sighting in the pins, difficulty adjusting the pins, difficulty adjusting the bracket, and difficulty adjusting the sight light.
When sighting in the pins, make sure that the pins are properly lined up with the target. The pin guard should be adjusted to the proper height to ensure that the sight is at the correct angle. If the pins are not lined up properly, the sight will not be accurate.
When adjusting the pins, make sure that the pins are centered on the target and the sight is level. If the pins are not centered, the sight may be off center and the accuracy of the shot will be affected. The pins should be adjusted until the sight is level and the pins are properly centered on the target.
When adjusting the bracket, make sure that it is securely mounted on the bow. If the bracket is loose, the sight may move when the bow is fired. The bracket should be adjusted until it is securely mounted on the bow.
When adjusting the sight light, make sure that it is aimed properly at the target. The brightness of the light should be adjusted so that it is not too bright or too dim. If the light is too bright, it may cause the sight to be inaccurate. If the light is too dim, it may not be able to be seen by the shooter.
Frequently Asked Questions[FAQs]
What tools are needed to adjust the Trophy Ridge 5 Pin Sight?
You will need a small Phillips head screwdriver to adjust the Trophy Ridge 5 Pin Sight.
How do I adjust the vertical and horizontal pins on the Trophy Ridge 5 Pin Sight?
To adjust the vertical and horizontal pins, use a Phillips head screwdriver to adjust the set screws located on the side of the sight. The set screws will allow you to adjust the pins to the desired height and width.
What is the best way to ensure the pins are level while adjusting the Trophy Ridge 5 Pin Sight?
To ensure the pins are level while adjusting the Trophy Ridge 5 Pin Sight, use a bubble level to make sure the pins are even with the bubble level.
How do I adjust the pin brightness on the Trophy Ridge 5 Pin Sight?
To adjust the pin brightness on the Trophy Ridge 5 Pin Sight, use a Phillips head screwdriver to adjust the set screw located on the side of the sight. The set screw will allow you to adjust the pin brightness to the desired level.
How do I replace the pins on the Trophy Ridge 5 Pin Sight?
To replace the pins on the Trophy Ridge 5 Pin Sight, use a Phillips head screwdriver to remove the set screw located on the side of the sight. Then, replace the old pin with a new one and reattach the set screw.
How do I adjust the windage and elevation of the Trophy Ridge 5 Pin Sight?
To adjust the windage and elevation of the Trophy Ridge 5 Pin Sight, use a Phillips head screwdriver to adjust the set screws located on the side of the sight. The set screws will allow you to adjust the windage and elevation to the desired levels.
How do I adjust the sight ring on the Trophy Ridge 5 Pin Sight?
To adjust the sight ring on the Trophy Ridge 5 Pin Sight, use a Phillips head screwdriver to adjust the set screws located on the side of the sight. The set screws will allow you to adjust the sight ring to the desired level.
How do I adjust the yardage indicator on the Trophy Ridge 5 Pin Sight?
To adjust the yardage indicator on the Trophy Ridge 5 Pin Sight, use a Phillips head screwdriver to adjust the set screws located on the side of the sight. The set screws will allow you to adjust the yardage indicator to the desired level.
Conclusion
After following the step-by-step instructions outlined in this article, you should now be able to adjust your Trophy Ridge 5 Pin Sight with confidence. With the right tools, patience, and attention to detail, you can ensure that your sight is adjusted properly for your shooting needs. With this knowledge, you can now confidently head out to the range and make some shots!

A. Wilcox Head is a lifelong shooter, hunter, and firearms enthusiast. Head grew up in a family where firearms were a way of life, and from an early age, he was taught the importance of firearm safety, accuracy, and proper hunting techniques.