Are you looking for a way to upgrade your Warren Tactical Front Fiber Optic Sight? If so, then you have come to the right place! In this guide, you will learn how to easily and quickly change your Warren Tactical Front Fiber Optic Sight in just a few simple steps. With the right tools and materials, you can easily make the upgrade to improve your sight and accuracy. So, let’s get started!
Step-by-Step Guide for Changing Warren Tactical Front Fiber Optic Sight
- Start by removing the existing front sight. This can be done by loosening the set screw located on the side of the sight with an Allen wrench. Once the screw is loose, the sight can be pulled off the slide.
- Take the new Warren Tactical Front Fiber Optic Sight and line it up with the slide so that the screw holes line up.
- Using an Allen wrench, tighten the set screw located on the side of the sight. This will secure the sight to the slide.
- Once the sight is secured, check to make sure the fiber optic is properly aligned with the slide. If it is not, the sight can be adjusted by loosening the set screw again and moving the sight slightly to the desired position.
- After the sight is properly aligned, tighten the set screw again and check the alignment once more. The sight should now be securely attached and ready for use.
Benefits of Changing Warren Tactical Front Fiber Optic Sight
The Warren Tactical Front Fiber Optic Sight is an excellent choice for anyone looking to upgrade their firearm. With its bright and easy to see fiber optic front sight, you can easily find and hit your target with greater accuracy. Beyond the improved accuracy, there are several other benefits that come with using the Warren Tactical Front Fiber Optic Sight.
One major benefit is improved speed and accuracy in target acquisition. The bright color of the fiber optic front sight helps you quickly identify and focus on your target. Additionally, the sight itself is designed to be snag-free, meaning you won’t have to worry about it catching on any clothing or accessories that you may be wearing. This feature allows for quicker and smoother draws, allowing you to acquire your target faster and with greater accuracy.
Another benefit of using a Warren Tactical Front Fiber Optic Sight is enhanced visibility in low-light situations. The bright fiber optics will help you quickly and accurately identify your target, even in dimly lit environments. This feature is especially helpful in home defense situations, where the ability to accurately identify and hit your target is especially important.
Finally, the Warren Tactical Front Fiber Optic Sight is designed to be extremely durable and reliable. The sight is made from high-grade aluminum, which is corrosion and wear resistant. This ensures that your sight will remain accurate and effective for many years to come.
In conclusion, the Warren Tactical Front Fiber Optic Sight is an excellent choice for anyone looking to upgrade their firearm. The bright, easy to see fiber optics, snag-free design, enhanced visibility in low-light situations, and durable construction all combine to make this sight an excellent choice for any shooter.
Common Mistakes to Avoid When Changing Warren Tactical Front Fiber Optic Sight
- Not properly zeroing the sights: When changing out a front fiber optic sight, it is important to make sure that it is properly zeroed before taking it to the range. This means adjusting the sight until the point of aim and the point of impact are the same. If the sight is not properly zeroed, it will be difficult to hit your target accurately.
- Not checking the sight for damage: Before changing out a front fiber optic sight, it is important to check it for any signs of damage. If the sight is damaged, it could cause the sight to not function properly, making it difficult to use.
- Not cleaning the sight: It is important to clean the front fiber optic sight before installing it on the firearm. This will ensure that any debris or dirt that may have gotten into the sight is cleared out, and it will also ensure that the sight will have a clear view when used.
- Not following the directions for installation: When installing a front fiber optic sight, it is important to follow the directions provided by the manufacturer. This will help ensure that the sight is properly installed, and that it will function properly.
- Not testing the sight: After the sight has been installed and zeroed, it is important to take it to the range and test it. This will help ensure that the sight is functioning as intended, and that it is accurately zeroed.
Tips and Tricks for Changing Warren Tactical Front Fiber Optic Sight
Changing a Warren Tactical Front Fiber Optic Sight is a relatively simple process. The first step is to remove the existing sight. This is done by using a sight pusher, a tool specifically designed to remove sights. Simply insert the sight pusher into the dovetail, and then use the handle to push the sight out of the dovetail.
Once the sight is removed, you can then install the new Warren Tactical Front Fiber Optic Sight. This is done by inserting the sight into the dovetail and then using the sight pusher to push the sight into place. Be sure to use a lubricant to ensure the sight is properly seated.
Once the sight is installed, you should test the fit by pushing on the sight from the side. If the sight moves easily, it is properly installed and ready for use. If the sight does not move, or is difficult to move, then it is not properly installed and needs to be adjusted.
To adjust the sight, you can use a hex wrench to loosen the screws on the sight body. Then, you can adjust the sight to the desired position by pushing it in the desired direction. Be sure to re-tighten the screws afterwards.
Finally, you should check the sight alignment by shooting a few rounds. If the sights are properly aligned, you will hit the target. If not, you may need to make additional adjustments. With a little practice, you will soon have your Warren Tactical Front Fiber Optic Sight properly installed and ready to use.
How to Install the Warren Tactical Front Fiber Optic Sight
Installing the Warren Tactical Front Fiber Optic Sight is a simple process that requires some basic tools and a few minutes of your time. First, make sure your firearm is unloaded and you have the necessary tools to make the installation. Then, remove the original front sight from your firearm. Depending on your firearm, you may need a sight pusher tool, hammer, and punch to remove the sight.
Once the original sight is removed, take your new Warren Tactical sight and place it on the dovetail cut of your firearm. Make sure the sight is positioned straight, then use a punch and hammer to lightly tap the sight in place. If there is any excess material, use a sight pusher tool to gently push it off.
Finally, adjust the height of the sight to match the height of the rear sight. This can be done with either a sight pusher tool or a set of needle-nose pliers. Once you are satisfied with the sight’s positioning, you are ready to take it to the range and sight it in!
Frequently Asked Questions [FAQs]
To change your Warren Tactical Front Fiber Optic Sight, you will need a small flat head screwdriver and a set of hex wrenches.
To remove the existing sight, use a small flat head screwdriver to remove the screws holding the sight in place. Once the screws are removed, you can gently slide the sight off the gun.
The Warren Tactical Front Fiber Optic Sight is adjustable for windage and elevation. To adjust for accuracy, you should use a small hex wrench to turn the adjustment screws located on the side of the sight.
It is important to regularly check the tightness of the screws to ensure the sight stays securely in place. You should check the screws at least once every few weeks or whenever you are changing out the sight.
Yes, it is safe to use a gunsmith to change the sight. However, you should make sure to use a qualified and experienced gunsmith to ensure the sight is installed correctly.
To ensure the sight is properly aligned, you should aim the gun at a target and adjust the elevation and windage screws until the point of aim is aligned with the point of impact.
Conclusion
Changing Warren Tactical Front Fiber Optic Sight is not a difficult task, as long as you have the right tools and follow the instructions carefully. After learning how to do this, you can be sure that your firearm will have improved accuracy and visibility. With a few simple steps, you can make your firearm safer and more reliable.

A. Wilcox Head is a lifelong shooter, hunter, and firearms enthusiast. Head grew up in a family where firearms were a way of life, and from an early age, he was taught the importance of firearm safety, accuracy, and proper hunting techniques.