Looking to reload your own 9mm ammo, there are a few things you’ll need to know. First, you’ll need to purchase a 9mm blank firing cartridge. These can be found at most gun stores or online. Once you have your blank firing cartridge, you’ll need to purchase a 9mm bullet.

There are a variety of 9mm bullets available, so be sure to choose one that is compatible with your blank firing cartridge. Finally, you’ll need to purchase a 9mm powder measure. This can also be found at most gun stores or online. Once you have all of your supplies, you’re ready to begin reloading your 9mm ammo!

How To Reload Blank 9Mm Ammo
How To Reload Blank 9Mm Ammo

What You’ll Need

There’s no better feeling than knowing you have plenty of ammunition to keep your 9mm handgun shooting. But what if you’re shooting blanks? That’s not a problem, as long as you know how to properly reload blank 9mm ammo. Here’s what you’ll need:

Ammunition

9mm blanks are the only type of ammunition that can be used in a 9mm handgun. You can find these at most gun stores or online.

A 9mm Handgun

You’ll need a 9mm handgun in order to shoot the blanks. Any type of 9mm handgun will do, including semi-automatic and revolvers.

A Blank 9mm Magazine

A blank 9mm magazine is required in order to properly load the blanks into the handgun. These can be found at most gun stores or online.

A Gun Cleaning Kit

It’s always a good idea to keep your gun clean, even if you’re only shooting blanks. A gun cleaning kit will help you do just that.

The Reloading Process

So, when you are reloading your 9mm ammunition, you need to check the primer size. The primer size is usually stamped on the box of the ammunition that you purchase. The box of the ammunition that you purchase will also have the bullet weight and the powder charge listed.

The primer size is usually stamped on the box of the ammunition that you purchase. The box of the ammunition that you purchase will also have the bullet weight and the powder charge listed. The box of the ammunition that you purchase will also have the bullet weight and the powder charge listed.

Tips and Tricks

The 9mm is a favorite among many shooters today. It’s small enough to be used for concealed carry and yet powerful enough to stop an assailant. It’s also relatively inexpensive to shoot. But what if you want to shoot even cheaper?

  • Reloading your own ammunition is one way to save money on shooting. It’s also a great way to get more accurate ammunition, since you can tailor each load to your own gun.
  • But reloading 9mm ammunition can be a bit tricky. The small size of the cartridge means that there is less room for error. In this article, we’ll give you some tips on how to reload blank 9mm ammo.
  • The first thing you need to do is to make sure that you have the right tools. You’ll need a set of dies specifically for the 9mm. You can find these at most gun stores or online.
  • You’ll also need a reloading press. A good press will make the process much easier. You can find a good press for around $100.
  • Once you have the press and dies, you’ll need some brass. You can find brass at most gun stores or online. You’ll need to sort the brass by headstamp.
  • The next step is to resize the brass. This step is important, because it ensures that the brass will fit in your gun properly. You can use a carbide die to resize the brass.
  • After you’ve resized the brass, you’ll need to trim it. You can use a case trimmer to do this. Make sure to follow the manufacturer’s instructions when trimming the brass.
  • The next step is to clean the brass. You can use a brass tumbler to clean the brass. This step is important, because it removes any dirt or debris from the brass.
  • Once the brass is clean, you’ll need to prime it. You can use a hand primer or a press primer. Make sure to follow the manufacturer’s instructions when priming the brass.
  • The next step is to load the powder. You can use a powder measure to do this. Make sure to follow the manufacturer’s instructions when loading the powder.
  • The next step is to seat the bullet. You can use a bullet seat to do this. Make sure to follow the manufacturer’s instructions when seating the bullet.
  • The final step is to crimp the brass. You can use a crimping tool to do this. Make sure to follow the manufacturer’s instructions when crimping the brass.

Once you’ve completed all of these steps, you’ll have a finished round of 9mm ammunition.

Preparing the Blank Shell Casings

Preparing the blank shell casings involves first cleaning the casings in a tumbler to remove any dirt and debris build up. Once the casings are clean, you need to cut a hole in the end of the casing and insert a primer, which provides the energy for firing the blank round. Once the primer is in place, you need to fill the casing with gunpowder and then insert the wad, which creates a seal between the gunpowder and the bullet. Finally, you need to crimp the casing to ensure the bullet is properly secured.

Assembling the Primers and Shell Casings

Assembling the primers and shell casings is the most important step in reloading blank 9mm ammo. First, you should inspect the primers to ensure they are not damaged or dented. Once you have inspected the primers, you will need to place them in the shell casing. The primer should fit snugly in the casing, but should not be forced. Once the primer is in place, you will need to place a bullet in the top of the casing. Make sure the bullet is seated properly and that the case is crimped correctly. Finally, you will need to inspect the finished shell to ensure it is ready for use.

Safety Tips for Reloading 9mm Blank Ammo

Reloading 9mm Blank Ammo
Reloading 9mm Blank Ammo

When reloading 9mm blank ammo, it is important to take safety precautions. Wear protective eyewear and gloves to protect against any flying debris. Make sure your reloading area is well ventilated, as primers and gunpowder release toxic fumes. Always keep the ammo away from any heat sources, and never smoke around any reloading materials. Double check the brass case to make sure it is free of any defects before reloading. Finally, make sure to store the reloaded blank ammo in a separate container away from live rounds.

Frequently Asked Questions

What supplies do you need to reload blank 9mm ammo?

You will need a 9mm blank gun, a 9mm blank ammunition reloading die, a 9mm blank shell holder, and a 9mm blank bullet.

How do you reload blank 9mm ammo?

To reload blank 9mm ammo, first make sure your 9mm blank gun is unloaded. Then, using your 9mm blank ammunition reloading die, load a 9mm blank shell into the shell holder. Next, load a 9mm blank bullet into the blank shell. Finally, screw the blank shell onto the end of the 9mm blank gun.

What are the benefits of reloading blank 9mm ammo?

The benefits of reloading blank 9mm ammo include saving money and being able to shoot more often.

How often should you reload blank 9mm ammo?

You should reload blank 9mm ammo as often as you need to.

What are some tips for reloading blank 9mm ammo?

Some tips for reloading blank 9mm ammo include loading the blank shell into the shell holder carefully and screwing the blank shell onto the end of the 9mm blank gun tightly.

Conclusion

With the right tools and a little bit of patience, reloading blank 9mm ammo is not difficult. By following the steps outlined in this article, you can produce your own ammunition at home without too much trouble. Just be sure to follow all safety precautions, and always double check your work to avoid any accidents.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *