An AR-15 A2 stock is the original stock that came on AR-15 rifles. While it is a great stock, many people prefer to remove it and replace it with a different one. There are a few different reasons why you might want to do this, but the most common reason is to make the rifle lighter.
Why you might want to remove your AR-15 A2 stock.
One reason you might want to remove your AR-15 A2 stock is if you want to install a different stock. For example, you might want to install an adjustable stock so that you can better customize the fit of your rifle to your body. Or, you might want to install a collapsible stock so that you can better transport your rifle.
Another reason you might want to remove your AR-15 A2 stock is if you want to replace the buffer tube. The buffer tube is the part of the stock that houses the spring that helps cycle the action of the rifle. over time, these springs can wear out and need to be replaced.
Finally, you might want to remove your AR-15 A2 stock in order to access the bolt carrier group. This is the part of the rifle that contains the firing pin and other parts that need to be cleaned and maintained on a regular basis.
Tools needed to remove an AR-15 A2 stock.
Assuming you would like a list of the tools needed to remove an AR-15 A2 stock:
- A set of allen wrenches
- A slotted screwdriver
- A hammer
- A punch
- A set of pliers
- A file
- A Dremel tool
First, you will need to remove the buttstock from the buffer tube. To do this, you will need an allen wrench to loosen the stock screw, and a slotted screwdriver to remove the stock nut. Next, you will need to remove the A2 stock from the lower receiver. For this, you will need a hammer and punch to remove the A2 stock pins, and a set of pliers to remove the A2 stock. Finally, you will need to use a file and Dremel tool to remove the A2 stock from the lower receiver.
Tips for reinstalling your AR-15 A2 stock.
Assuming you would like tips for reinstalling an AR-15 A2 stock:
- Make sure the buffer tube is properly lubricated before reinstalling the stock. This will ensure smooth operation of the stock.
- When reinstalling the stock, make sure that the buffer tube is properly aligned with the receiver. This will ensure that the stock functions properly.
- Inspect the buffer tube and receiver for any damage before reinstalling the stock. This will ensure that the stock is properly secured and will not come loose.
- Make sure that the stock is properly seated on the buffer tube before tightening the screws. This will ensure that the stock is secure and will not come loose.
- Tighten the screws securely, but do not overtighten. This will ensure that the stock is secure without damaging the receiver.
How to avoid common mistakes when removing an AR-15 A2 stock.
common mistakes when removing an AR-15 A2 stock include forgetting to depress the detent on the receiver extension tube before attempting to unscrew the stock, as well as not holding onto the stock firmly enough while unscrewing it. Additionally, make sure that you have a firm grip on the stock when depressing the detent, as the stock can pop off and be launched across the room if you’re not careful.
Pros and cons of removing an AR-15 A2 stock.
The AR-15 A2 stock is the original stock that came with the rifle. It is made of a solid piece of plastic and is very strong. It is also very comfortable to shoot with and has a nice, solid feel to it. The main downside to the AR-15 A2 stock is that it is not adjustable and does not have a pistol grip.
Further reading/resources on removing an AR-15 A2 stock.
The AR-15 A2 stock is the original stock that came with the rifle. It is made of a durable polymer and is designed for use with a standard A2 buffer tube. While it is possible to remove the stock without the use of tools, it is generally recommended that you use a set of Torx wrenches to remove the stock.
Once you have the wrenches, begin by removing the receiver extension cap. This is the small, round cap located at the rear of the receiver extension. Next, remove the receiver extension nut. This is the large, knurled nut that secures the receiver extension to the lower receiver.
With the receiver extension nut removed, you should be able to slide the stock off of the receiver extension. If the stock is stubborn, you may need to tap it with a mallet or other soft tool to loosen it. Once the stock is off, you can reinstall the receiver extension nut and cap, and your AR-15 will be ready to go.
Frequently Asked Questions
How do I remove an A2 stock from an AR-15?
Use a flathead screwdriver to remove the two screws that hold the stock in place. Once the screws are removed, the stock can be pulled off the rifle.
How do I install an A2 stock on an AR-15?
Place the stock on the rifle so that the two holes line up with the screws. Insert the screws and tighten them down.
What is an A2 stock?
An A2 stock is a type of stock that is commonly used on AR-15 rifles. It is a fixed stock that is typically made from polymer or aluminum.
What are the benefits of an A2 stock?
An A2 stock provides a number of benefits, including a more solid shooting platform, increased accuracy, and a reduction in felt recoil.
Are there any drawbacks to an A2 stock?
One potential drawback of an A2 stock is that it may not be as comfortable for some shooters as a collapsible stock.
There are a few different ways to remove an AR-15 A2 stock, but the most common and easiest way is to simply push the release button on the back of the stock and then pull the stock off of the receiver. If the stock is stuck or difficult to remove, you may need to use a flat head screwdriver to help pry it off. Once the stock is off, you can then unscrew the two screws that hold the receiver extension in place and then remove the extension.