How To Remove Ar 15 Dust Cover?

To remove your AR 15 dust cover, first make sure the gun is unloaded and the safety is on. Then, find the dust cover release lever, which is usually on the right side of the receiver. Push down on the lever, and the dust cover should pop off. If it doesn’t, you may need to use a small punch or other tool to help release it. With the dust cover off, you can now clean your AR 15 and keep it free of dirt and debris.

How To Remove Ar 15 Dust Cover?
How To Remove Ar 15 Dust Cover?

Why you might need to remove the dust cover from your AR 15?

One reason you might need to remove the dust cover from your AR 15 is to clean the chamber. When you clean the chamber, you will also need to remove the bolt carrier group and charging handle. Another reason you might need to remove the dust cover is to replace the gas rings on the bolt carrier group.

Ensure that the AR 15 is unloaded?

To ensure that the AR 15 is unloaded, the first step is to remove the magazine. Next, you will need to engage the safety by moving the switch to the “safe” position. With the safety engaged, pull the charging handle to the rear and release it. This will ensure that there is no round in the chamber. Finally, visually inspect the chamber to ensure that it is empty.

Locate the dust cover release button?

To remove the dust cover from an AR-15, first locate the dust cover release button. This is usually located on the left side of the firearm, just above the trigger. Once you have located the dust cover release button, depress it with your finger and then pull the dust cover off of the firearm.

Push the release button and release the dust cover?

The first thing you need to do is make sure that your AR-15 is unloaded. Once you have verified that the weapon is unloaded, you will need to push the release button that is located on the left side of the weapon, just above the trigger. This will release the dust cover and allow you to access the inner workings of the AR-15.

Inspect the chamber to ensure that it is empty?

First, make sure the firearm is unloaded. Next, locate the dust cover pin, which is located on the left side of the firearm, above the trigger. Using your finger or a small tool, push the pin out from left to right. The dust cover should now be loose and can be removed by simply sliding it off the firearm.

Close the dust cover?

The first step is to ensure that the firearm is unloaded. Next, locate the dust cover release latch and depress it while simultaneously pulling the charging handle to the rear. This will cause the dust cover to pivot open. Once the dust cover is opened, you will be able to see the bolt carrier group. At this point, you can clean the bolt carrier group as desired. To close the dust cover, simply pivot it back into place and release the dust cover release latch.

Why it is important to keep your AR 15 clean?

AR-15s are high-powered rifles that can be used for hunting or target practice. They are also used by the military and law enforcement. AR-15s require regular cleaning and maintenance to keep them in good working order. A dirty AR-15 can jam or misfire, which can be dangerous. Dust and dirt can also build up in the action and trigger assembly, making the rifle harder to operate.

Frequently Asked Questions

How do I remove the dust cover from my AR-15?

There are a few different ways to remove the dust cover from your AR15. The most common way is to simply depress the retaining pin and slide the cover off. However, if the retaining pin is difficult to access, you may need to use a punch or other tool to drive it out.

Why do I need to remove the dust cover from my AR-15?

The dust cover helps to keep debris and other foreign objects from entering the chamber of your AR-15. Removing the dust cover allows you to clean the chamber and ensure that it is free of any obstructions.

How often should I remove the dust cover from my AR-15?

It is generally recommended that you remove the dust cover from your AR-15 every time you clean the weapon. This will help to keep the chamber clean and free of any buildup.

What happens if I don’t remove the dust cover from my AR-15?

If you do not remove the dust from your AR-15, debris and other foreign objects can enter the chamber and cause a malfunction. In addition, the chamber can become excessively dirty, which can lead to decreased accuracy and reliability.

Can I damage my AR-15 by removing the dust cover?

No, you cannot damage your AR-15 by removing the dust cover. However, if you are not careful, you can damage the finish on your AR-15. Be sure to use a soft cloth or your finger to avoid scratching the surface.

Conclusion

To remove a fixed dust cover on an AR-15, first make sure the weapon is unloaded. Next, locate the take down pin at the rear of the receiver and push it out from the left to the right. With the take down pin removed, the dust cover can now be lifted off of the receiver.

Similar Posts

One Comment

Leave a Reply

Your email address will not be published.