Are you looking to get your ATN night vision scope sighted in? This guide will provide you with the information you need to properly sight in your ATN night vision scope. By following these instructions, you will be able to ensure your scope is properly aligned and ready for use. With your ATN night vision scope sighted in, you’ll be ready for whatever night-time activity you have planned.
Step-by-Step Guide to Sighting In Your Atn Night Vision Scope
Mount Your Scope
Start by mounting your ATN night vision scope onto your rifle. Secure the scope onto the rifle with the necessary mounting hardware and then set the eye relief distance and windage and elevation settings to the recommended default positions.
Set a Target
The next step is to set up a target at a known distance. Aim at the target and adjust the windage and elevation settings on your ATN night vision scope to align the reticle with the target.
Make Sighting Adjustments
Once the reticle is aligned with the target, proceed to make sight adjustments using the adjustment knobs on the side of the ATN night vision scope. Make sure to make fine adjustments and not large ones, as it will take longer to sight in the scope with large adjustments. Make sure to take into account the windage, elevation, and parallax of the reticle and the target.

Test Fire and Repeat
When the adjustments are complete, test fire the rifle and observe the impact of the bullet on the target. Make any necessary adjustments and then repeat the sighting process. Once the bullet is consistently hitting the target, the ATN night vision scope is properly sighted in.
What You’ll Need to Sight In an Atn Night Vision Scope
Sighting in an ATN night vision scope is a relatively straightforward process. To begin, you’ll need the following items:
- ATN Night Vision Scope
- A stable shooting platform
- Ammunition
- Target
- An Allen wrench and screws
- A tool to adjust the elevation and windage knobs
First, make sure that the night vision scope is securely mounted on the gun and that the screws are tightened with the Allen wrench. Next, make sure that the adjustments on the elevation and windage knobs are set to zero.
Once the scope is securely mounted, you’ll need to fire a few rounds at the target to see where the bullets are landing. Make sure the target is set to a reasonable distance that matches the range of the gun. After firing a few rounds, mark where the bullets are landing on the target.
Now, use the tool to adjust the elevation and windage knobs until the bullets are landing in the center of the target. Once the bullets are consistently hitting the center of the target, your ATN night vision scope is sighted in and ready for use.
Tips and Tricks for Sighting In Your Atn Night Vision Scope
Sighting in your ATN Night Vision Scope is an important part of the process of using your scope effectively. It is important to ensure that your scope is correctly sighted in so that you can accurately identify your targets and ensure that you are shooting accurately. Here are a few tips and tricks for sighting in your ATN Night Vision Scope:
- Use a shooting rest: Using a shooting rest will help you keep your rifle steady and maintain a consistent sight picture at all times.
- Start at the lowest magnification: Start at the lowest magnification setting and adjust the scope so that your sight picture is clear and accurate. This will help you ensure that your scope is correctly sighted in and that you are aiming accurately.
- Use a bore sighter: Using a bore sighter will help you accurately aim your scope without having to fire a shot. This will help you save time and ammunition when sighting in your scope.
- Take your time: Sighting in your scope can take some time and patience. Take your time and make sure that you are sighting in your scope correctly.
- Make sure your scope is level: Make sure that your scope is level before you begin sighting it in. This will help you ensure that you are aiming accurately.
Following these simple tips and tricks should help you get the best possible results when sighting in your ATN Night Vision Scope. Taking the time to sight in your scope properly will help you ensure that you are shooting accurately and that you are getting the best performance out of your scope.
How to Adjust Your Atn Night Vision Scope After Sighting In
Adjusting your ATN night vision scope after sighting in is a relatively simple process. To begin, you’ll need to make sure that your scope is properly mounted and that the reticle is centered in the scope’s sight picture. Once the scope is properly mounted, you’ll need to set the power setting to the highest available setting. This will ensure that you have the best possible image quality.
Next, you’ll need to adjust the windage and elevation knobs on the scope to ensure that your reticle is properly aligned with the target. Finally, you’ll need to adjust the focus knob on the scope to ensure that your image is clear and sharp. Once these adjustments are made, you should be able to accurately and consistently hit your target.
Troubleshooting Common Issues With Sighting In Your Atn Night Vision Scope
Sighting in your ATN night vision scope can be tricky, but with the right steps and troubleshooting techniques, it can be done. The first step is to ensure that you have all of the necessary components to properly mount the scope. This includes mounting rings, a mounting base, and a torque wrench for tightening the mounting hardware.
Once the scope is mounted, place the rifle in a shooting rest and aim at a target 25 yards away. Use a laser bore sight to get the scope roughly zeroed in, then adjust the windage and elevation knobs until the laser beam is centered on the target.
If you’re having trouble sighting in the scope, make sure the batteries are fresh and that the reticle is turned on and visible. If the reticle is not visible, you may need to adjust the brightness and contrast settings on the scope. Additionally, if the reticle is not centered in the field of view, you may need to adjust the eye relief or the focus of the scope.
If the reticle is still off, you may need to use the external windage and elevation knobs to fine-tune the adjustments. This can be done by firing test shots and adjusting the knobs accordingly. Once you’ve achieved a satisfactory zero, you should be able to sight in the scope and enjoy the benefits of night vision.
Frequently Asked Questions [FAQs]
Can I sight in my ATN night vision scope during the day?
While it is possible to sight in an ATN night vision scope during the day, it is generally not recommended as the scope may not be able to properly adjust to the light levels. If you need to sight in the scope during the day, it is best to do so in an area with minimal light.
What type of ammunition should I use when sighting in my ATN night vision scope?
It is best to use high-quality, match-grade ammunition when sighting in any type of firearm. This is especially true when sighting in a night vision scope, as the scope’s reticle and crosshairs may not be properly adjusted if lower quality ammunition is used.
How should I adjust the parallax setting on my ATN night vision scope?
The parallax setting on an ATN night vision scope should be adjusted until the reticle is properly aligned at the desired distance. This can be done by adjusting the adjustable objective lens on the scope until the reticle appears to be in the same plane as the target.
How far away should I sight in my ATN night vision scope?
This will depend on the type of firearm that the scope is mounted on. For most firearms, it is best to sight in the scope at a distance of 25 yards. This will provide the best accuracy and ensure that the scope is properly adjusted for the desired distance.
Can I use a scope that is not specifically designed for night vision with my ATN night vision scope?
No, it is not recommended to use a scope that is not specifically designed for night vision with an ATN night vision scope. Night vision scopes are designed to be used with specialized optics that are optimized for nighttime use.
Can I use an ATN night vision scope for hunting?
Yes, ATN night vision scopes are designed to be used for hunting and other nighttime activities. However, it is important to keep in mind that these scopes can only be used legally in certain jurisdictions and during certain times of the year. Be sure to check the laws in your area before using an ATN night vision scope for hunting.
How should I store my ATN night vision scope when I am not using it?
When not in use, it is best to store your ATN night vision scope in a cool, dry environment. It is also important to make sure that the scope is securely mounted and not exposed to direct sunlight. Additionally, it is a good idea to keep the scope’s lenses covered when not in use to prevent dust and dirt from accumulating on them.
Conclusion
In conclusion, sighting in a ATN night vision scope requires patience, time and attention to detail. Once the scope is properly sighted in, it can be used to accurately and reliably observe objects in the dark. With the right tools and a little bit of practice, anyone can sight in a night vision scope with ease.

A. Wilcox Head is a lifelong shooter, hunter, and firearms enthusiast. Head grew up in a family where firearms were a way of life, and from an early age, he was taught the importance of firearm safety, accuracy, and proper hunting techniques.